All new at Lethal Performance is the DivisionX line of fuel system components.
The SN95 dual pump return style fuel hat can house (2) GSS342 pumps the Aeromotive 340 Stealth Pumps or the DivisionX Stryker 340lph pumps. It has a return port built into it so there's no modification necessary to your stock tank. This assembly is a direct replacement for your stock fuel pump setup and bolts right in. It's got a single -8an feed and a -6an return port. All of the DivisionX hats are hard anodized in black for extra protection are are fully compatible with regular gasoline as well as E85.
-Oversize pump retainer for GSS342 pumps the Aeromotive 340 Stealth Pumps or the DivisionX Stryker 340lph pumps, snap on electrical connectors for pumps
-Direct replacement for your stock fuel pump assembly. Bolts right in using an OEM gasket for a perfect seal as well as it uses the OEM 03-04 cobra fuel sending unit in the same stock location.
-Eliminates the PPRV and offers a direct in-tank hose routing to both fuel pumps for optimum fuel delivery.
-Two pairs of gas blocked 12 gauge conductors using 12ga Mil Spec fuel resistant wires for fuel pump wiring to the FPDM(s). This allows your GSS342 pumps the Aeromotive 340 Stealth Pumps or the DivisionX Stryker 340lph pumps to operate without losses from undersized OEM wires and will help in dropping duty cycle. Wiring for the ground and fuel level sender also included.
• No welding or caulk used in assembly or manufacturing. Full billet components use o-rings, OEM seals, and gas blocked through conductors.
• Hard Anodized in a deep black finish for extra protection
• Compatible with E85
• Uses 30R10 submersible fuel hose which won't crack or deteriorate
• Hardware and installation instructions included
The DivisionX fuel hat manifold includes:
• CNC Machined from high quality billet aluminum
• All Gas Blocked wiring for the Pumps, Ground and Level Sender including the proper spade connectors to connect the wires to each fuel pump
• Oversize pump retainer for GSS342 pumps the Aeromotive 340 Stealth Pumps or the DivisionX Stryker 340lph pumps, snap on electrical connectors for pumps, and AN -8 fitting for return port
• Pre-cut and installed Gates 30R10 Submersible Fuel Hose for each pump
• All XRP an Fittings
• New Bolts for mounting the assembly to the fuel tank
NOTE: Uses the factory 2003-2004 Cobra level sender or you can use any 99-04 GT, 03-04 Mach-1 or 99-01 Cobra level sender with the purchase of the SN95 level sender adapter bracket.