El Paso, TX - In many race engine applications, such as with blown alcohol or magneto fired ignitions, an engine requires more rpm to fire up. MSD's new High Speed DynaForce Starters are designed to deliver higher cranking rpm to fire up your high horsepower race engine.
The High Speed starters feature all new components beginning with a 3.4 horsepower motor that spins unique gear set combination resulting in higher cranking rpm for your racing engine. MSD incorporates a durable solenoid that will operate with 12 and 16 volt electrical systems.
Inside the downsized housing you'll find a balanced armature that receives guidance by two ball bearings for smooth engagement and thousands of starts. Another handy feature is that the billet mounting block can be rotated in different positions to help clear oil pans and exhaust systems.
• Blue printed solenoid for increased endurance accepts 12 and 16 volts
• 3.73:1 gear set spins the engine up to 25% faster than most gear reduction starters
• Ball bearing supported armature and pinion for endurance
• Billet mount can be clocked to assist in clearance issues
• Tough wrinkle red coating is easy to grasp during pit thrashes
Ford 289, 302, 351W - PN 50902
Ford BB 351M, 400, 429 - PN 50922
Chevy 10 Pitch/139 Tooth - PN 50953
Chevy 153/168 Tooth, Pro Mag - PN 50952
Chrysler 318-440 - PN 50982
For the 2013 race season, MSD is posting contingency dollars for DynaForce Starters in NMCA, IHRA, and PSCA!
For more information on the complete line of MSD DynaForce Starters and Alternators, check out www.msdDynaForce.com or contact Manny Grijalva at email@example.com, (915) 856-2416.
Founded in 1970, MSD Performance has been the most recognized name in performance ignition systems for more than 40 years. The company designs, develops, tests, and manufactures its entire line of ignition systems, electronic fuel injection systems, starters, alternators and spark plug wires and accessories from its headquarters in El Paso, Texas.